Duck à l’orange


Home (main menu) Plastic models Plastic models — land vehicles Duck à l’orange

Duck à l’orange

Airfix 1/76th (OO) scale DUKW with scratch built hang gliders by Everard Cunion in July 2017

Airfix 1/76th (OO) scale DUKW with scratch built hang gliders

Airfix 1/76th (OO) scale DUKW with scratch built hang gliders

The General Motors DUKW (Duck) was an amphibious vehicle used by the allies in World War 2. It was designed by a team led by an American racing sailboat designer, and they based it on the standard 2.5 ton truck.

Military service

Some called it a lame duck. Others said it would be a sitting duck. And a few predicted it would quickly become a dead duck.

— from the narrative of the documentary Duck Landing

However, the conservative leadership of the US military was soon won over by the new machine’s extraordinary capabilities.

DUKW in World War 2

DUKW in action in World War 2

“To me it was a marvellous vehicle… A fantastic invention. I’ve got to hand it to the Americans for that. It was a privilege to drive it and work it.”

— John Geldart, British Army DUKW driver in World War 2 (from Duck Landing, DUKW documentary)

Dune climbing DUKW in World War 2

Dune climbing DUKW in World War 2

Guadalupe dune hang gliding event

Thirty years after the end of the war that inspired its creation, at an event on an almost windless day on the California coast in May 1975, a DUKW ferried hang gliders and their pilots the mile from the car park to the top of the 450 ft Guadalupe Dune. That is the example that my model depicts.

Seldom do “wheels” of any kind attract even a glance at a flying site. But the bright orange amphibious “duck” that shuttled people and gliders back and forth was an attraction in itself. The $1 fare was a bargain.

— Rich Grigsby in Ground Skimmer, June 1975

Model build

I bought the Airfix 1/76th (OO) scale Duck in 2001 for £3.49 (about 5 US dollars) from Plastic Past Times in Parkstone, Dorset, England. It is five inches (12.5 cm) long and 1.3 inches (3.3 cm) wide. (Italeri makes much larger 1/35th scale kit, which would arguably make a better model, but I found no figures in that scale adaptable for this purpose.)

Airfix OO scale DUKW cover art

Airfix OO scale DUKW cover art

One pilot who attended the Guadalupe dune hang gliding event described it in the UK hang gliding magazine as dayglo orange and another author, in the US magazine, described it as bright orange. To allow for possible over-enthusiasm of the writers involved, I used plain orange. The configuration of the Duck – wheel guards fitted, windshield folded down, splash guard down, no canvas top, and no gun mount – is based on black and white photos in those articles.

Guadalupe Dune DUKW 1976

The DUKW is five inches (12.5 cm) long and 1.3 inches (3.3 cm) wide

Pilots and equipment

The people are from the Hasegawa 1/72 U.S. Pilot/Ground Crew Set and the Fujimi 1/72 Flight Deck Crew and Carrier Tractor set. Because of the difference in scale from the Duck, they are slightly too large, but they are as near as I could find. My only modifications to the crew, other than painting them in non military colours and adding some harness details to the pilot carrying a helmet, were cutting off the earphone bulges from some helmets. The guy sitting on the edge of the Duck, for example, was a US Navy aircraft carrier tractor driver. (No doubt he took up hang gliding after he got back from Nam.)

1/72nd scale 1975 hang glider pilot

1/72nd scale 1975 hang glider pilot

The metal stirrup – a bent piece of wire – is too thick, but I noticed that only when viewing the photo. (When walking about, you normally put it round the back of your neck or clipped it to the harness front to prevent it dangling between your legs.)

OO Scale DUKW with on-board hang gliding gear

The width of the actual content of this photo is three inches (8 cm).

The folded up harnesses are based on the flight bags that come with the aircrew/ground crew sets (as did the helmet) with bit of bent wire for the stirrup and some chords made either from stringy Bostik (glue) and/or cotton thread.

The ladder on the port side of the DUKW, visible in the photo in Ground Skimmer, is from my spare parts box.

Hang gliders

Among the kites there were Seagull 3s and 5s, Dragonflies, Bennett Phoenix, Swallowtails, Quicksilvers, Conquests, three Icarus 5s, and Volmer with his VJ24.

— Stewart ‘Ziggy’ Hampton, Wings magazine, June 1975

We no longer refer to hang gliders as kites (a hangover from World War 2 slang) but there is a scratch builder’s paradise in that one sentence. The Seagulls had parabolic curved leading edges and the Ultralight Products Dragonfly had a short keel and ‘truncated’ tips, which gave it a yaw characteristic that imparted a uniquely graceful motion in the air. The Quicksilver was a fabric and tube hang glider with a straight wing and tailplane, and a rudder connected to the seat harness. It had no ailerons or equivalent, but its exaggerated dihedral caused it to bank in turns. The Icarus 5 was a tailless rigid with drag rudders, and Volmer Jensen’s VJ-24 was an aluminium and fabric sailplane with a hang cage instead of an enclosed cockpit.

Tissue paper, toothpicks, and glue

Tissue paper, toothpicks, and glue

However, my hang gliders are ‘standard Rogallos’ plus one Seagull 3. I made them out of tissue paper, toothpicks, wire, thread, glue, and paint. I could write a short book about the trouble I had scratch-building them, but it would not be an interesting book.

Guadalupe Dune DUKW 1976

Aerial view

You might notice that the glider with the blue sail has parabolic curved leading edges like the Seagull 3. I formed the curves by semi-breaking the toothpick airframe tubes at several points. Unfortunately, I made a mistake (one of many) and I had to cut the keel short, so it is more like the Seagull 4 of a few years later. However, the difference is not apparent in the finished item in its de-rigged state.

OO Scale Scratch Built Hang Glider

The actual content of this close-up is just over two inches (6 cm) wide measured at the hang glider.

Referring to the hang glider close-up: The rolled up sail is tissue paper and the larger airframe tubes, which are rather too thick, are wooden toothpicks. (Only the cross-tube is visible because the leading edge and keel tubes are inside the sail.) The control frame is a piece of bent wire, the king post is polystyrene ‘stretched sprue’, and the rigging cables are cotton thread, as are the sail ties.

The figure is one inch (2.5 cm) tall.


Guadalupe Dune DUKW 1976

In colour: Guadalupe Dune, California, early 1975

Other than the absence of cover bags, the main visible difference between de-rigged flex-wing (Rogallo) hang gliders in 1975 and the equivalent nowadays is that their control frames were not easy to fully de-rig, so you folded them flat for transporting, but they retained their triangular shapes. (When fully rigged for flight, today’s flex-wing hang gliders bear little resemblance to those of 1975.) On board the DUKW, control frames remained extended, possibly to facilitate holding on to them during the trip up the dune…

Airfix OO Scale DUKW and other models

On display


Polkadot sail Wills Wing Swallowtail hang glider

Polkadot Wills Wing Swallowtail

The polka-dot sail Wills Wing Swallowtail in the accompanying photo is visible parked on the sand in one of the photos in Ground Skimmer. It (or another identical wing) was used later that summer for the making of Sky Riders starring James Coburn, Susannah York, and others. So there is plenty of potential for adding to this set of models if I am ever short of a challenge!

Related (internal links)

Hang gliding before 1976

Paint it black, my review of the 20th Century Fox movie Sky Riders (1976)

Plastic models

Plastic models — land vehicles

See also (external links)

Duck Landing History Channel/Imperial War Museum documentary on YouTube

General Motors DUKW on Wikipedia

Guadalupe-Nipomo Dunes on Wikipedia

References

5th Annual Otto Lilienthal Hang Glider Meet, Celebrating the 127th Birthday of Otto Lilienthal article and photo by Stewart ‘Ziggy’ Hampton, Wings magazine, British Hang Gliding Association, June 1975

Otto Lilienthal Meet 1975 by Rich Grigsby and accompanying photo by Jim Otterstrom in Ground Skimmer, United States Hang Gliding Association, June 1975

Advertisements